Přihlásit
: [1]
   |   
: nahrani modulu radice  ( 3539 )
jentzek
Sr. Member
****

Karma: 12
: 305



« : February 26, 2011, 17:25:07 »

Po startu se me nenacte modul pro radic sata_sil. Zvlastni, ze 2 starty po instalu bylo nacteni uspesny. Jakym zpusobem zadat prikaz pro nahrani? Zkousel jsem pridat nazev modulu do modprobe.conf, asi treba nejaky alias, jak sem patral. V tomhle se moc nevyznam, proto zadam o radu. Zatim to resim pres /etc/rc.d/rc.local pridanim radku
:
modprobe sata_sil
mount -a
KDE tohle bohuzel moc nesedi.
Diky
User0


« #1 : February 26, 2011, 17:45:47 »

Více info ?
pert2
Sr. Member
****

Karma: 9
: 291


« #2 : February 27, 2011, 15:26:01 »

A co ti brání přidat to do /etc/modprobe.preload:

# /etc/modprobe.preload: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line.  Comments begin with
# a `#', and everything on the line after them are ignored.
# this file is for module-init-tools (kernel 2.5 and above) ONLY
# for old kernel use /etc/modules

# Toto je muj modul, ktery potrebuju nahrat pri startu PC
sata_sil
jentzek
Sr. Member
****

Karma: 12
: 305



« #3 : February 27, 2011, 19:28:51 »

A co ti brání přidat to do /etc/modprobe.preload:

...
sata_sil

Samozrejme, ze nic 
Problem byl ten, ze sem to rval do jinych souboru, napr. modules je okomentovany podobne:
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line.  Comments begin with
# a `#', and everything on the line after them are ignored.


To, ze se modul nenahral, me potom udivilo.
modprobe.preload je potom to spravny misto. Diky
: [1]
   |   
 
: